- Home
- Solutions
- Smart metering and sub-metering
- Tenant billing
Tenant Utility Billing in Qatar
Monthly statements for chilled water, electricity and water, built from each tenant's own meters and lease rates, held for review when something looks wrong, and traceable back to the meter.
Last updated
What is tenant utility billing?
Tenant utility billing turns meter readings into a monthly statement for each tenant: chilled water, electricity and water, priced at the rates in their lease. A good system checks the readings before the bill is built, holds any bill that looks wrong for review, and keeps an audit trail from the meter register to the amount due.
In Qatar it usually means recharging two kinds of bill. Electricity and water come from Kahramaa, billed on consumption slabs. Chilled water comes from a district cooling provider, typically as a fixed capacity charge plus a consumption charge in ton-hours, and the capacity charge may continue even when a unit is empty (Qatar Living). Structures differ between providers and buildings, so the rates live in each lease.
Utilities are one of the most common causes of landlord and tenant disputes, and a lease should say how excess use is billed (Qatar Living). Statements from each tenant's own BTU and water meters give that clause something to stand on.
Split by floor area
One bill shared by square metre. Easy to run, hard to defend.
Manual reads and a spreadsheet
Meters read once a month, typed in and priced by hand. A misread digit becomes a dispute.
Metered statements
Readings collected remotely, checked, priced from the lease and held when they look wrong.
How a statement adds up.
Every line comes from a meter register or the lease, so anyone can check it.
| Charge | Basis | Quantity × rate | QAR |
|---|---|---|---|
| Chilled water capacity | Contracted capacity, 18 TR | 18 × 140.00 | 2,520.00 |
| Chilled water consumption | BTU-17 register, 44,011.4 to 48,044.4 TRh | 4,033.0 × 1.30 | 5,242.90 |
| Electricity | EM-1204 register, 212,640 to 216,820 kWh | 4,180 × 0.20 | 836.00 |
| Water | WM-1204 register, 1,284 to 1,315 m³ | 31 × 5.20 | 161.20 |
| Metering and billing service | Lease | 1 × 180.00 | 180.00 |
| Total for the period | 8,940.10 |
Figures from the example statement on the bill preview screen. Rates are illustrative and set per lease; they are not Kahramaa, Qatar Cool or Marafeq tariffs. The two-part capacity and consumption structure follows how district cooling is typically billed (Qatar Living).
What is checked before a bill goes out.
A bill is held for review when any of these fail. The reason travels with it.
| Check | What it catches | What happens |
|---|---|---|
| Readings complete | A meter that stopped reporting during the period | Held until the gap is explained or read on site |
| Register goes up | A meter swapped, reset or misread | Held, with the old and new register shown |
| Against the same week last month | Use more than 15% above normal | Held, with the daily profile and likely cause |
| Sub-meters against the main | Unmetered loss above its target | Flagged to the landlord before the recharge |
| Rate and capacity from the lease | A tenant on the wrong tariff or contract | Held until the lease record is fixed |
How it works on Quoriam.
Set up
Each unit gets its meters, lease rates, contracted capacity and billing period. Common areas and landlord systems are split by the rule in your leases.
Read and check
Meters are read every 15 minutes. At the billing date Quoriam takes the opening and closing registers and runs the checks above.
Preview and approve
Statements are built as drafts. Your billing team approves the ready ones in one go and works through the held ones with the evidence attached.
Send and record
Approved statements go to tenants, and the totals export to your billing or ERP system. Every reading, edit and approval is logged.

System view
For IT, OT and security reviewers: where the data goes, and how.
- At the metersBTU, electricity and water meters per tenant, and the mains
- In the riser or meter roomM-Bus master or gateway reading the meters
- NetworkSite LAN or cellular, encrypted and kept apart from the control network
- Quoriam platformOn your premises or cloud hosted in Qatar
- Your team and systemsStatements to tenants; totals to billing, ERP or finance
What your team sees.
Why a bill was held, what the tenant was told and who approved it.



Or just ask.
Quoriam AI answers in plain language and turns the answer into an action.
Where it's used in Qatar.
Wherever one utility bill is shared by many tenants.
Office towers
Chilled water and electricity recharged to each tenant every month.
Facilities and smart buildingsDistrict cooled developments
Capacity and consumption passed through to each unit at its contracted rate.
Utilities and district coolingResidential towers
A statement per apartment, with water and cooling from the unit's own meters.
Water meteringMalls and retail podiums
Shops, food courts and kiosks billed from their own meters, with common areas split by the lease.
BTU and chilled water metering
Questions buyers ask.
Something else? Ask us during the free assessment.
How do you bill district cooling to tenants?
From each tenant's own BTU meter, in two parts: a capacity charge for the cooling contracted in their lease, and a consumption charge for the ton-hours their meter registered. Quoriam applies the rates and capacity in each lease. Where a unit has no BTU meter, it can only be billed by a split, which is where most disputes start.
What happens when a tenant disputes a bill?
You open the statement and show them where each line came from: the opening and closing registers, the 15-minute profile, the same weeks last year and any alert raised during the period. If the meter itself is in doubt, it can be checked on site, and the statement held until then.
What meters do we need for tenant billing?
One meter per utility per unit you bill: a BTU meter for chilled water, an electricity meter and a water meter. Meters on the mains and the largest landlord systems let you check the sub-meters add up. Existing meters with M-Bus, Modbus or pulse outputs can usually be used.
Can the bills go into our ERP or accounting system?
Statements and totals can be exported as files today. Quoriam also connects directly to billing and ERP systems, including SAP, Oracle and Microsoft Dynamics. We agree the format with your finance team during the assessment.
Can we recharge common areas and landlord services?
Yes, by the rule your leases set: by floor area, by metered share or a fixed amount. Meters on chilled water pumps, AHUs, lifts and car park fans show what each service really uses, so the split can follow use.
What does it cost?
It depends on how many units you bill and how many meters need adding or connecting. The free three-week assessment ends with a meter survey, a scope and a fixed price.
Related.
Tenant billing is part of sub-metering on the Quoriam platform.
- Smart metering and sub-metering
Meter electricity, water and chilled water by tenant or line, and settle every bill on evidence.
- BTU and chilled water metering
Chilled water energy measured per tenant or building, read remotely and billed on evidence.
- Water metering
Smart water meters read remotely, with consumption by building, floor or unit.
Send bills you can stand behind.
A free three-week assessment. We survey your meters and current billing, then show you which units can be billed from meters and what's missing.
We take on two assessments a month.Quoriam is designed to pay back within six months. How we calculate payback











