1. Home
  2. Industries
  3. Facilities and smart buildings

Smart Building Solutions in Qatar

Chiller plant health, chilled water and electricity sub-metering, occupancy and indoor air quality for towers, malls, hotels, hospitals and offices in Qatar, on one platform alongside your BMS.

Works with your BMSBACnet and ModbusChillers, meters, people, airOne platformSupported in DohaAfter go-live

Last updated

Large open-plan office floor with three people working at a shared table
Illustration: Quoriam showing a floor's live occupancy.

What are smart building solutions?

Smart building solutions connect a building's plant, meters and spaces to one platform, so facilities teams see energy, comfort and equipment health together. In Qatar that starts with cooling, which is most of a building's energy and most of its tenant complaints.

Most buildings in Qatar already have a BMS. It runs the plant well, but it is built for the control room: it doesn't bill tenants, count people, raise work orders on a technician's phone or compare one tower with the next. Smart building solutions add those jobs on top of the BMS, read-only, with sensors where the BMS has none.

On Quoriam that means sub-metering for energy and billing, occupancy monitoring for space, environmental monitoring for air and comfort, and predictive maintenance for the chiller plant.

What goes wrong.

What facilities managers in Qatar tell us before we start.

  • "Tenants dispute every cooling bill."

    Chilled water is the biggest line on most tenant bills, and when the reading comes from an estimate or an old meter, every invoice turns into a negotiation.

  • "We cool floors nobody is on."

    Floors are conditioned to the same schedule whether they are full or half empty. Without real occupancy data there is no case to change it.

  • "The chiller tripped on a 47-degree afternoon."

    Summer is when the plant runs at its limit and when a failure hurts most. The signs were in the compressor's vibration and the approach temperatures for weeks.

Decisions the data makes possible.

Examples of what a reading leads to in a building. Illustrative, not project results.

Decisions the data makes possible.
What Quoriam seesThe decisionWhat it saves
Unit 1204 used 22% more chilled water than the same week last monthHold the bill and check the unit's FCUs before invoicingA dispute and a credit note
Level 5 averages 38% occupancy on ThursdaysConsolidate teams and set that floor back on ThursdaysCooling an empty floor every week
CH-02 supply water 3.1 °C above baseline at the same loadClean the condenser tubes at the next planned stopA trip at peak load in August
Night-time water flow in Tower B never drops to zeroLook for the leak floor by floorWater lost every night until someone notices
CO2 above 1000 ppm in meeting rooms after 2 pmRaise fresh air in those zones in the afternoonComplaints about stuffy rooms

Quoriam is designed to pay back within six months. How we calculate payback

Quoriam AI in facilities and smart buildings.

The digital energy and utilities engineer follows the meters, the plant and the water systems of every building in the portfolio.

Industrial AI

Digital energy and utilities engineer

It spots a leak pattern in the water meter data overnight, with flow between 01:00 and 04:00 well above the meter's own baseline. It raises the alert with the riser and the zone, and drafts the job for the facilities team.

An example of how it works. It is illustrative and is not a project result.
The decision it supports
Send a technician to the named riser in the morning, or isolate the zone now.
The outcome
The facilities team starts the day with the location known and the job written, before the leak reaches a tenant or the bill.

Meet the specialists

Questions buyers ask.

Something else? Ask us during the free assessment.

Do we need to replace our BMS?

No. Quoriam reads your BMS and chiller controllers over BACnet or Modbus, read-only, and adds billing, occupancy, alerts to phones and work orders on top.

Can Quoriam bill tenants for chilled water?

Yes. BTU meters on each tenant's supply give the energy used; Quoriam reads them remotely and produces a monthly bill per unit with the readings behind it. See sub-metering.

Is people counting a privacy risk?

Most occupancy sensors count without identifying anyone. We choose sensors that fit each space and your privacy policy; see occupancy and people counting.

How many sensors does a building need?

It depends on the floors, tenants and plant. A tower with a BMS and existing meters may need very few new devices. The free assessment counts it.

What does it cost?

It depends on the size of the building and what is already measured. The free three-week assessment ends with a scope and a fixed price.

Find what your building really uses.

A free three-week assessment. We read your BMS and meters, show where energy and space are going, and recommend what to fix first.

We take on two assessments a month.

Quoriam is designed to pay back within six months. How we calculate payback